Custom marine plywood solutions using okoume or sapele dolor lumbar embarazo

Our customers build some truly beautiful things. They are an uncompromising bunch that require the finest quality and grade of lumber for their projects. The same holds true for the plywood they use, and this is one of the reasons our Bruynzeel line escoliosis lumbar izquierda of marine plywood is so popular.

I truly believe there is not a finer made panel out there, and this is one of the reasons we have built out such an extensive product line with both Okoume and Sapele marine panels. This enables us to solve a myriad of our customers’ problems, especially when you add in the ability to customize the face veneers to meet the specific project need escoliosis tratamiento fisioterapeutico. This flexibility is of utmost importance in the marine industry, where everyone not only has exacting standards, but each builder dolor lumbar y mareos has a different set of needs and internal standards.


When it comes to plywood, being able to start off with a rock solid, stable core is key, but having a lightweight option and a denser, harder, and stain grade option gives us a modular approach to address the entire spectrum of needs. For Example

We have a marine customer who was using Teak and Holly plywood, but they were increasingly unhappy with the quality of the face and the inconsistent Birch core quality. We supplied a sample of Teak and Holly Bruynzeel on the Okoume escoliosis tratamiento core, and the customer was thrilled with the face and the high quality core.

Bruynzeel offers us the option for face veneers with many different thicknesses. It allows us to create a panel perfectly matched to the customer’s usage. Sometimes we need a face veneer the same thickness at the inner plies (usually around 1.5 mm), so the result is a much higher quality dolor lumbar lado izquierdo and balanced panel. Other times this extra thickness isn’t necessary for wall mounted panels and we will lay out a panel with a thinner veneer. Sometimes its not about the thickness of the veneer but the orientation. In this case we took extra pains to make sure the Teak and Holly face was center herniated lumbar disc sleeping position matched with a narrower strip on the edges that could balance out with an adjacent panel or be sawn off and butted to the next panel to keep the same spacing pattern.

The problem arose when we learned that this customer was wanting to use these panels as interior flooring on a boat. The customer told us that the panel did not meet their contractura lumbar tiempo de recuperacion stress test. Okoume is soft (400 psi Janka), so despite it being an outstanding species for a marine panel, often these panels are used as a substrate for something else that is much harder. The beauty of Okoume lies in the defect free, perfectly homogenous surface. At the same time, it isn’t very interesting and relies on something going on top of it. In many cases, the panel is used in cabinetry.

When this customer told us that hernia de disco lumbar these panels would be used for flooring, we knew immediately that it wouldn’t stand up to the abuse. Even when we used a thickner 1.5 mm face veneer and despite the 1000 psi Janka rating columna vertebral lumbar of Teak, that face veneer only equaled about 1/5 of the total panel thickness. Previously, they had used a Birch core, and that is more than 3 times harder (1200 psi Janka) than the Okoume.

Once we had all the information about how the customer planned to use the plywood, the solution was obvious, and we suggested working with our other marine panel by Bruynzeel that is 100% Sapele (1510 symptoms of herniated lumbar disk psi Janka). This product (called Super Hechthout by Bruynzeel) is made with the same exacting standards as the Okoume (Hechthout) panel, but instead of Okoume, it is all rotary cut Sapele. Like the Okoume, there are no seams or patches, and the panel carries the BS1088 escoliosis dorsal izquierda rating and Lloyds registration. But you can imagine the durability difference that comes from building these panels out of such a substantially denser and harder species.

We combined the superior Teak and Holly veneer, which that customer already loved, with a Sapele core, and we had a product that resulted which was harder and more durable than their original product that was already giving them quality concerns.

Needless to say preparacion para radiografia de columna lumbosacra, this customer is thrilled, and they have become true believers in this Bruynzeel modular approach just like us. This was an interesting opportunity for us, and it illustrated again how having all the information about how the plywood (or lumber) is to be used can enable us to customize the perfect solution.