Woods that contain high amounts of tannic acid – sanding tricks cirugia lumbar

(such as white and red oak, cherry and walnut) can be ebonized by brushing on an acidic solution of iron and water. Depending on the species, the black color that results is likely to contain shades of brown, red dolor lumbar causas or green. The coloring is usually uniform and consistent, without the blotching that sometimes occurs with oil-based wood stains. On oak and other woods that have large pores, the effect is particularly striking because the pores usually remain light in color. The technique

Finish-sand the piece you want to treat to 180 grit. The iron and rotoescoliosis lumbar izquierda vinegar solution contains lots of water, so it’s a good idea to preemptively raise the grain. Dampen the sanded piece with water, let it dry and then sand lightly with 180 grit to remove the raised fibers.

Finish-sand the piece you want to bleach to 180 grit Bleaching solutions contain lots of water, so it’s a good idea to preemptively raise the grain. Dampen the escoliosis lumbar en adultos sanded piece with water, let it dry and then sand lightly with 180 grit to remove the raised fibers.

Don your protective gear and follow the manufacturer’s directions to apply the bleach. Some tell you to apply Part A, wait a few minutes, and then apply Part B; others tell you to mix the two parts together and apply the mixture. Wipe on a light coat of the solution (Photo 1). There’s no need to saturate the wood; just dampen the surface. Let the piece dry. Then repeat the process—it usually takes seven or eight applications to bleach walnut white. When you’re satisfied with the white color, wipe the piece with a damp cloth to remove any bleach residue. Then let it dry.

do. On tannin-rich woods, the reaction can hernia de disco lumbar ejercicios contraindicados be instantaneous (Photo at right). Let the piece dry and then repeat the process. If the surface starts to feel rough, lightly sand between applications. Eventually the color will become uniformly dark; you can stop whenever you hernia lumbar sintomas like, though. Sometimes a lighter shade of black looks great, so you may want to call it quits after one or two applications. When you’re satisfied with the color, wipe down the wood with a damp cloth to remove any residue from the solution. Let the wood dry before applying a finish. Oil finishes, wiping varnishes and oil/varnish finishes enhance this coloring process.

EBONIZED WOOD OFTEN escoliosis toracica ISN’T PURE BLACK. Depending on the method used, the color usually includes shades of brown, red, purple or blue. A rich, deep, pure black is hard to achieve—unless you char the wood with a torch. This method works on any wood, although the results will look distinctively different from one species to another, depending on the character of the wood. Also, a uniform appearance is easier to achieve on face and edge grain than on end grain.

This finish is tricky because it’s fairly easy to overheat the wood and cause it to crack or ignite. End grain surfaces and thin pieces (less than 3/8" thick) are especially vulnerable. It’s a good idea to develop your charring technique by practicing on pieces that aren’t "keepers." The technique

Finish-sand the piece you intend to char the radiografia dorsolumbar same as for a clear finish—charring doesn’t cover sanding escoliosis tratamiento marks or torn grain as well as you might think. Work in an area free of combustible materials. Wear a heavy protective glove to hold the piece while charring its surface, and use a propane torch with an adjustable flame so you can control the heat level.

The best approach is to char the wood to a uniform appearance in stages, stopping to brush off the burned debris between applications of heat. Start by lightly skimming the wood’s surface with the flame (Photo 1). Make slightly overlapping passes and move the torch continuously. If the wood ignites, simply blow out the flame and let the wood cool before resuming.

After lightly charring the entire surface, let the piece cool, and then go over it with a soft metal brush to remove the ash and other completely burned debris (Photo 2). Brushing often accentuates the latewood, which contractura lumbar sintomas is usually harder and more resistant to the flame than the earlywood. Torch and brush the entire surface a second time to make the charred color as uniform as possible.

The estenosis lumbar severa last step really brings out the rich, carbon-black color. After the piece has cooled, apply a coat of oil finish. I usually use boiled linseed oil or pure tung oil (both thinned by one-third with mineral spirits). Rags soaked with boiled linseed oil are flammable, so dispose of them properly.